TitleProduct

High Quantity FRP Pultruded Rod

  • Price:

    Negotiable

  • minimum:

  • Total supply:

  • Delivery term:

    The date of payment from buyers deliver within days

  • seat:

    Jiangsu

  • Validity to:

    Long-term effective

  • Last update:

    2017-07-14 00:34

  • Browse the number:

    178

Send an inquiries

Company Profile

Nanjing Jinglue FRP Co., Ltd.

By certification [File Integrity]

Contact:Mrs. Yan(Mr.)  

Email:

Telephone:

Phone:

Area:Jiangsu

Address:Jiangsu

Website: http://njlf-frp.world-led.net/

Product Details

1. Properties of FRP pultruded profiles

A. High strength
FRP is stronger than structural steel on a pound-for pound basis. It has been used to buildings, walkway, sub-floors and platforms.

B. Light weight
FRP is 20-25% the weight of steel and 70% the weight of aluminum. FRP are easily transported, handled and lifted into place. Total structures can often be preassembled and shipped to the job site ready to installation.

C. Anti-corrosion
FRP will not rot and are impervious to a broad range of corrosive elements. This feature makes FRP a natural selection for indoor or outdoor structures in pulp and paper mills, chemical plants, water and sewage treatment plants, structural near salt water and other corrosive environments.

D. Electro-magnetic transparency
FRP are transparent to radio waves, microwaves and other electromagnetic. It is widely used to make antennas.

E. Non-conductive
FRP has low thermal/ electrical conductivity.

F. Dimensional stability
The coefficient of thermal expansion of FRP is slightly less than steel and significantly less than aluminum.

G. Aesthetics
FRP are pigmented throughout the thickness of the part and can be made to virtually any desired custom color. Special surfacing veils are also available to create special surface appearances such as wood grain, marble, granite, etc.

2.Raw materials and craft
The products are manufactured with the pultrusion process after choosing the correct raw materials major including the resin, fibers and additives according to the profiles requirement including mechanical strength, electrical insulation, anti-corrosion etc.

3. Applications
The products can meet the customer's requirements by using different combination of resin, fibers and others. The products offer a unique combination of chemical resistance, size stability, high strength, and thermal/electric non-conductivity, etc.

The products can be used as construction pin, canopy rods, underground cable jackets, cable cores (bearing tensile stress), handles of spade and hammer, flag pole, tent pole, fishing pole etc.



4. Some normal sizes of FRP rod:(Pls note special sizes are also welcomed.) 


6. Following is General Physical Parameters of FRP Pultruded Profiles.(If have special requirements, pls contact Nanjing Jinglue.)

 LW-lengthwise CW-crosswise PE=perpendicular to laminate face



Mechanical performance Value Units Test method
Tensile strength LW 230-600 Mpa ASTM D-638
CW 45-80
Tensile modulus LW 18-30 Gpa ASTM D-638
CW 7-13
Flexural strength LW 300-700 Mpa ASTM D-790
CW 80-120
Flexural modulus LW 20-26 Gpa ASTM D-790
CW 7-12
Compressive strength LW 280 Mpa ASTM D-695
CW 105
Compressive modulus LW 21 Gpa ASTM D-695
CW 7.9
Interlayer shear strength LW 25 Mpa ASTM D-2344
Impact strength 280 KJ/M 2 ASTM D-256
Physical property Value Units Test method
Barcol Hardness 50 --- ASTM D-495
Water absorption(25 centigrade,24h) 0.2-0.5 % ASTM D-570
Density 1.75-2.00 g/cm 3 ASTM D-792
Coefficient of thermal expansion(LW) 5.0 10 -6 /centigrade ASTM D-696
Coefficient of thermal conductivity 0.4 W/(m . K) ASTM C-518
Elongation to break 0.9 % ASTM D-638
Electrical property Value Units Test method
Arc resistance(LW) 120 seconds ASTM D-495
Dielectric constant(PF) 5 @60hz ASTM D-150
Dielectric strength(PF) 8 KV/mm ASTM D-149
Dielectric strength(LW) 1.6 KV/mm ASTM D-149
Surface resistance 10 15 -10 12 ASTM D-257
Volume resistance 10 15 -10 12 . cm ASTM D-257
Flammability property Value Units Test method
Tunnel test Max 25 second ASTM E-4
Oxygen data 25-28 % ASTM 2863
28-32
>32
Flammability classification Self extinguish ASTM D635